Stainless Steel Infrastructure
#TMB SS

All stainless steel components. Custom designed to meet your application needs and requirements. Stainless steel infrastructure is only available for TMB 7000 automatic parts washers.




 

Small Parts Basket
#1034 - Large
#1035 - Small

Parts Washer Small Parts Basket keeps your small parts together for optimum cleaning and prevents small parts from falling down into the base of the parts washer. Galvanized steel construction



 

Parts Washer Splash Shield
#1690

Parts Washer Splash Shield. Stop backsplash and spills on your parts washer. Stainless Steel splash shield construction.



 

Flow Thru Detail Brush Auto Wash Kit
#7645

Parts Washer Flow Thru Detail Brush for use in manual parts washer and now on automatic parts washer units. Detergent and hot water continually flow thru the scrub brush allowing you to get your parts clean faster.



 

Parts Washer Auto Fill
110v - #7180    220v - #7181

Parts Washer Auto Fill adds water and introduces the proper amount of detergent when the parts washer runs low or during detergent change out.




 

Oil Skimmer
#7113

Oil skimmer removes built up oil every night after the parts washer solution has settled. Stainless steel belt skims oil from the top removing it from your parts washer.




 

Brake Clean Dispenser
#9999

Oil skimmer removes built up oil every night after the parts washer solution has settled. Stainless steel belt skims oil from the top removing it from your parts washer.




 

Sink Insert Sediment Tray
#1056

Molded tray that fits the entire bottom of the full size sink. Inside it has an oil absorbent towel on the bottom, then a 1" foam filter topped off with a metal grate to set your parts on as you wash. This catches the larger particles before they get down into the cleaning solution. The 1" foam filter can be taken out and hosed to clean. Remove the oil towel and any collected debris as often as necessary dependent upon use.

 

Parts Washer Work Light
#1615

Parts Washer Work Light for use with Renegade manual parts washers. Ideal for low light work areas, ensuring visibility when cleaning your parts.




 

Parts Washer Foot Switch
#1008

Easy On/Off control of the Renegade parts washer. Extends the pump and solution life of parts washer.
Easy on off foot pedal to use to start the water flow while you’re hands are full. Allows you to keep the water readily available with the ease of just using a foot to activate.



 

Parts Washer Oil Towel
#1103

Parts Washer Oil towel for use in our Oil Towel Tray. General purpose 1 ply (14x17) cut to fit





 

Parts Washer Oil Towel Tray with Hardware
#1108

Parts Washer Oil Towel Tray attaches to the inside of a manual parts washer base above the water line to remove excess oils from the parts cleaning detergent.




 

Parts Washer 7 Day Timer
#1050

Parts Washer 7 Day Timer allows your parts washer to turn itself off after hours, and turn on again the next day. Reduces Evaporation due to reduced parts washer running time. Can be used with automatic parts washers and manual parts washers.



 

Parts Washer Scrub Pads
#1046

Parts Washer Scrub Pad refill for use with our scrub pad holder. For those extra tough jobs that need some personal attention to get it done. A must have for every shop.




 

Parts Washer Scrub Pad Holder
#1032

Parts Washer Scrub Pad Holder for use in manual parts washer units. Scrub Pad Holder attaches easily to the sink top on your manual parts washer. Scrub Pad Holder holds 10 Scrub pads.



 

Parts Washer Flow Thru Scrub Brush
#0410

Parts Washer Flow Thru Scrub Brush for use in manual parts washer units. Gets the stubborn grease, grime, and gunk off of your parts with ease. Detergent and hot water continually flow thru the scrub brush allowing you to get your parts clean faster.



 

Sink Insert Oil Towel Replacement
#1115

Parts Washer Sink Insert Oil Towel use in manual parts washer sink insert tray. Pre cut to fit inside our sink insert sediment tray. Helps reduce the amount of oil and small debris that enters the parts washer cleaning solution.


 

Sink Insert Replacement Foam
#1060

Parts Washer Sink Insert Tray Replacement Foam for use in manual parts washer sink insert tray. Pre cut to fit inside our sink insert sediment tray. Helps reduce the amount of oil and small debris that enters the parts washer cleaning solution


 

Nitrile Gloves
Sm - #8880     Med. - #8881     Lg. - #8882     Ex-Lg. - #8883

Nitrile Gloves are resistant to chemicals. 5 mil, Blue Nitrile gloves, 9 1/2" in length. Ambidextrous, beaded glove cuff. Sizes small through extra large.



 

Triple Cartridge Filtration System
#0823

Triple stage filtration system. For extended solution life and precision cleaning needs. For those businesses that need to filter their water/soap solution down to a finer micron. This system allows you to put staged micron filters in so your solution will test out to the 4 micron stage if you need it.


 

Single Cartridge Filtration System
#0810

Single stage filtration system. For extended solution life and precision cleaning needs. This is the standard filtration used on our machines today. Allows you to filter out the micron impurities in your solution which will make it last longer and prolong the life of your pump.



 

Cartridge Filter Replacement
#0822 - 3 Pack
#0802 - 12 Pack

Parts Washer Cartridge Filter Replacement for the Single Cartridge Filtration System, and the Triple Cartridge Filtration System. Parts Washer Cartridge Filter Replacement is available to 4 microns.


 

Parts Washer Drain Bag
#0804 - Long, 55 micron
#0803 - Short, 100 micron

Parts Washer Drain Bag for use in manual parts washer units. Drain bag hangs under sink base to catch debris. Parts washer drain bag available in 2 different sizes meet your parts cleaning needs and special cleaning requirements.